PbSe 2 Watt Cooled Photoconductive IR Detectors

TE Cooled Infrared Detectors with Fast Response and High Sensitivity in the 1 – 5.5 um Wavelength Band
Ambient Temperature: +25°C
Detector Operating Temperature -35°C
Typical Cooler Power at or near Max. Cooling: 0.9 volts @ 1.2 amps
Standard Specifications – Electrical
All detector specifications are at a bias voltage of 35 V/mm distance between electrodes applied across the detector and with a one MegOhm load resistor in series. All specifications apply at or near maximum cooling with the heat sink @ +25°C.
  Minimum Typical Maximum Units
Wavelength of Max. Response 4.1 4.3   µm
D*(λpk, 1050 Hz, 1 Hz) 1.6 x 1010 3.0 x 1010   cm Hz1/2 w-1
Element Resistance (Dark) 1.0 5.0 15.0 MegOhm
Time Constant (not typically measured)   9 20 µsec
Rated Element Temperature     +85 °C
Delta T at or near Max. Cooling 55 60   °C

For square or rectangular element sizes and/or packages not listed, please contact us: (707) 620-0160, Info@irmatl.com
When using the table below, remove parenthesis and insert appropriate designation for package type in the space. Example: 7 for TO-37, 8 for TO-8.

Model Number Element
Size
(mm)
Responsivity (lpk, 1050) v/w Standard Package Options
Minimum Typical
B1-( )C3T 1 x 1 66,000 100,000 TO-37, TO-8
B2-( )C3T 2 x 2 33,000 50,000 TO-37, TO-8
B3-( )C3T 3 x 3 22,000 33,000 TO-37, TO-8
  • To specify thermistor option for all TE cooled detectors, add the suffix -T or -TC (calibrated) to the model number.

Learn More About Our Model Numbers: